The MESA 7I92 is a low cost, general purpose, FPGA based programmable I/O card with 100 BaseT Ethernet host connection.   The 7I92 uses standard parallel port pinouts and connectors for compatibility with most parallel port interfaced motion control / CNC breakout cards/ multi axis step motor drives, allowing a motion control performance boost while retaining a reliable real time Ethernet interface. Unlike the parallel port that the 7I92 replaces, each I/O bit has individually programmable direction and function. The 7I92 has a simplified UDP host data transfer system that allows operation in real time if required and compatibility with standard networks for non-real time applications. The 7I92 provides 34 I/O bits (17 per connector) All I/O bits are 5V tolerant and have pullup resistors. A power source option allows the 7I92 to supply 5V power to breakout boards if desired. Firmware modules are provided for hardware step generation, quadrature encoder counting,  PWM generation, digital I/O,  Smart Serial remote I/O, BISS, SSI, SPI, UART interfaces and more.  Configurations are available that are compatible with common breakout cards and multi axis step motor drives like the Gecko G540 and Leadshine MX3660. All motion control firmware is open source and easily modified to support new functions or different mixes of functions. I/O connectors are a one female DB25 and one latching 26 pin header.

There are currently six 7I92 compatible breakout cards available from Mesa, the 7I74 through 7I78 and 7I85. The 7I76 is a step/dir oriented breakout with 5 axis of buffered step/dir outputs, one spindle encoder input, one isolated 0-10V analog spindle speed plus isolated direction and enable outputs, one RS-422 expansion port, 32 isolated 5-32V inputs and 16 isolated 5-32V 300 mA outputs. The 7I77 is a analog servo interface with 6 encoder inputs, 6 analog +-10V outputs, one RS-422 expansion port, 32 isolated 5-32V inputs, and 16 isolated 5-32V 300 mA outputs. The7I92 supports two breakout cards so for example a 10 Axis step/dir configuration or 12 axis analog servo configuration is possible with a single 7I92M and two Mesa breakout cards.

Support Documents
Manual Download Support Manual
Support Software Download Support Software

There are no reviews for this product.

Write a review

Please login or register to review

7I92 Anything I/O Ethernet card 1x DB25F 1x 26 pin header P1 BAD

  • US$10.00


Related Products

7I92TF Anything I/O Ethernet card 1x DB25 Female, 1x 26 pin header

7I92TF Anything I/O Ethernet card 1x DB25 Female, 1x 26 pin header

The MESA 7I92TF is a low cost, general purpose, FPGA based progra..

US$109.00