The 7I95T is a Ethernet connected motion control
interface designed for controlling up to 6 Axis of step&dir
step motor or servo motor drives and includes encoder feedback for each axis. The 7I95T replaces the 7I95 and offers better Ethernet ESD resistance, better Input RFI rejection and a larger FPGA. Step rates up to 10 MHz are
supported. The 7I95T also has 24 isolated inputs plus 6 isolated outputs
for general purpose I/O use. 6 high speed encoder interfaces are provided
axis feedback and for spindle synchronized motion. Two RS-422/RS485 serial expansion
ports and a parallel expansion port are also provided.
All step and direction outputs are buffered 5V
signals that can drive 24 mA. All outputs support differential
mode to reduce susceptibility to noise. The encoders can
be used with TTL or differential input.
24 isolated inputs are provided for general control use
including limit switch and control panel inputs. Inputs operate with 3V
to 36V DC and can have a positive or negative common for sourcing or
sinking input applications. 8 inputs can be used to support up to 4 quadrature MPGs. Six 36V 2A isolated outputs allow sinking,
sourcing combinations of both.
Two RS-422/RS-485 interface is provided for
I/O expansion via a serial I/O daughtercard. In addition to the
on card I/O, A FPGA expansion connector compatible with Mesa's 25 pin
daughtercards or standard parallel port breakout boards allow almost
unlimited I/O options including additional quadrature or absolute
encoder inputs, step/dir or PWM/dir outputs, and field I/O expansion to
hundreds of I/O points. All field wiring is terminated in
pluggable 3.5 mm screw terminal blocks. The 7i95T runs from a single 5V supply
Support Documents | |
Manual | Download Support Manual |
Support Software | Download Support Software |
7I95T Ethernet interfaced Step/dir +encoder + I/O
- Brand: Mesa Electronics
- Product Code: 7I95T
- Availability: 16
-
US$249.00
-
- 10 or more US$199.00
- 25 or more US$189.00
- 100 or more US$180.00