• 7I76EU STEP/IO  Step & dir plus I/O daughtercard - universal output version

The 7I76EU is a remote FPGA card with Ethernet interface designed for interfacing up to 5 Axis of step/dir step motor or servo motor drives and also provides a spindle encoder interface, isolated analog spindle speed control and 48 isolated I/O points for general purpose field I/O use.  All step and direction outputs are buffered 5V signals that can drive 24 mA.  All outputs support differential mode to reduce susceptibility to noise. An isolated analog spindle voltage with direction and enable or forward and reverse outputs is provided for spindle control as is a single spindle encoder channel with TTL or differential inputs. 48 points of isolated field I/O are provided for general control use including limit switch and control panel inputs, coolant enable and tool changer control outputs.  Isolated I/O includes 32 sinking inputs and 16 sourcing,sinking or push-pull  outputs. Inputs can sense 5V to 32V signals and the outputs can switch 5V through 28V signals.  Maximum output load is 300 mA. Outputs are short circuit protected. In addition to the being able to read digital on/off status of each input, four input pin voltages are readable with 12 bit resolution, and two MPG encoder inputs are provided as an option on four field inputs. Field I/O is powered by an isolated 5-28V field power source. One RS-422 interface is provided for I/O expansion via a serial I/O daughtercard.  In addition to the on card I/O, two FPGA expansion connectors compatible with Mesa's 25 pin daughtercards allow almost unlimited I/O options.  All field wiring is terminated in pluggable 3.5 mm screw terminal blocks.  The 7I76EU is an upgraded replacement of the 7I76E and 7I76ED. Added features are: sourcing,sinking, and push-pull field output modes selectable on a per output basis, No flyback diodes required on inductive field I/O loads, spindle digital outputs support both ENA/DIR and FWD/REV modes.


Please! one per customer until we get production qtys

Support Documents
Manual Download Support Manual
Support Software Download Support Software

Write a review

Please login or register to review

7I76EU STEP/IO Step & dir plus I/O daughtercard - universal output version

  • US$219.00


  • 10 or more US$175.00
  • 25 or more US$166.00
  • 100 or more US$158.00

Related Products

DIN RAIL ADAPTER KIT (3 PCS.)

DIN RAIL ADAPTER KIT (3 PCS.)

DIN rail mounting hardware is available for all daughtercards wit..

US$12.00

DB25M-IDC26 CABLE 18"

DB25M-IDC26 CABLE 18"

DB25M to IDC26 flat cable 18 inch Expansion connector cable for 5..

US$10.00

DB25M-DB25M CABLE 18"

DB25M-DB25M CABLE 18"

DB25M to DB25M flat cable 18 inch Expansion connector cable for 5..

US$12.00